Common printing terms:
1. White/white leakage: the printing paper is mostly white. When printing or plate making, the color of the connection is not close,
and the white paper background color is exposed.
2. White: photo plate making process in the era of hanging net. To remedy the lack of dark bit photosensitivity of online pictures,
you can remove the original flash once or put a piece of paper to fill the spot exposure, or directly use the flash lamp to flash white
light to increase the deep net of the original manuscript and make the image soft.
3. Exploding fat: "binge eating" will of course "fat", film silver grain feeling much, light will also expand the territory. The manual
set is more exposed in the photosensitive film and the transparent thick film.
4. Colortrapping: color separation and plate making intentionally make the color transfer bit expansion, reduce the impact of
inaccurate overprinting.
5. Field: refers to the area of the color block without the dot, usually refers to the full version.
6. Anti-white: the text or lines are printed with Yin grain, and the white paper is exposed.
7 hit the net: amplitude modulation network color separation process, dot Angle distribution error, or each net Angle distance
is less than 25°, mograin began to be obvious.
8. Flying net: the screen hanging process of lens plate making. The screen is removed after normal exposure, and the short
exposure is added to increase contrast.
9. Dog teeth: A dog's "teeth" are bumpy. The image lacks pixels, and the edges appear "dog teeth" when enlarged.
10. Mei flower point: like deer like mesh. The bad is called mat grain, worse is moire.
11. Alignment: layout instructions, with the prefix as the baseline. Extended to the Mosaic, binding, refers to the plate head as the
benchmark.
12. Mask: it is a mask for manual color separation. It can be used for film drying or red film cutting, and can be used for ground
withdrawal or color correction.
13. Reflexive: refers to a printing method that saves printing plate. Let the paper first printed on one side, after the reverse and reverse
the bottom of the paper, called the bottom of the reflexive version, and the tail when the bottom of the mouth reverse, called the tail
of the mouth reverse version. It is the process of reprinting the back of the paper without changing the printing plate.
14. Needle position: the edge position of the block gauge of the printing sheet. Paper has length, printing color and cutting need
to have needle alignment.
15. Stone number: the name of the number of printing in the stone printing era. Paper presses a color to weigh a stone.
16. Second-hand: This does not mean "second-hand". The assistant of a printing press.
17. Typescript: pre-printing a prototype for formal printing through the typescript machine.
18. Bleeding: the printing and binding process requires the ground color or picture of the page to cross the cutting line 3mm,
which is called bleeding.
19. Flying edge: "flying", cut, remove the meaning. Flying edge refers to the removal of bleeding edge, is a binding term.